Odeslat nové téma Odpovědět na téma  [ Příspěvků: 5 ] 
Autor Zpráva
 Předmět příspěvku: Halová sezóna 2021-2022
PříspěvekNapsal: sob 25.09.2021 12:55 
Moderátor serveru
Moderátor serveru
Uživatelský avatar

Registrován: 29.1.2004
Příspěvky: 5848
Bydliště: Týn nad Vltavou
Obrázky: 5
Blog: Zobrazit blog (1)
Tak to vypadá, že halová sezóna po roční odmlce bude! V Litvě se už dnes 25.9. závodí, ale my to taky doženeme.

Obrázek

Takže zakládám nový thread, kde budu vyvěšovat soutěže, kam naposílám sestavy a průběžně budu odpovídat na případné dotazy :-)

_________________
Vertigo 2m, Extra 330SC, Supertrino F3P (54g)+Lantsov 15", RCFactory Extra 330LT, JETI DS16


Nahoru
 Profil Soukromé album  
 
 
 Předmět příspěvku: Re: Halová sezóna 2021-2022
PříspěvekNapsal: sob 25.09.2021 12:56 
Moderátor serveru
Moderátor serveru
Uživatelský avatar

Registrován: 29.1.2004
Příspěvky: 5848
Bydliště: Týn nad Vltavou
Obrázky: 5
Blog: Zobrazit blog (1)
Kalendář soutěží


Varnsdorfská halovka
Datum konání:15.1. 2022
Přihlášky : pilot.jindra@email.cz
Místo konání : Městská sportovní hala VARNSDORF-Ul.Západní 2984
POZOR!!! Přezůvky nutné
Startovné 350 kč(platí se na místě)
Občerstvení zajištěno
Za LMK Varnsdorf - Jindřich štrubínský tel.775 480 405
Létáme kat. - RCEA,F3P-AA,F3P-APF3P-AM,PYLONY a AIR-RACE.
Hala bude otevřena od 7 00 hod.


3. ročník Air race Kaplice 2022 - Sportovní hala ZŠ Kaplice
29.1.2022
Létá se kategorie Air Race dle místních pravidel.
https://mapy.cz/s/mefupokode


Třebíčská halovka
Datum konání:26.2. 2022
Místo konání : Hala SPŠ Třebíč, ul. Manž. Cirieových
POZOR!!! Přezůvky nutné
Létáme kat. - RCEA,F3P-AA,F3P-APF3P-AM,PYLONY a AIR-RACE (neboli všechny obvyklé).
Hala bude otevřena od 7 00 hod.

(přidám i zahraniční závody ve Švýcarsku :-) )
Swiss Open Indoor Masters 2022, FAI World Cup F3P & AFM
Date: (Friday 11.) / Saturday 12. / Sunday 13. Marc 2022
Registration: Event Calender SMV / https://modellflug.ch/events.aspx?Event=5961&lang=DE / starting 1.12.2021
Event hall: Dorftreff / https://goo.gl/maps/5Eaf8hMg95TGyApS9 /, Rapperswilerstrasse 18, 8733 Eschenbach SG
Plus Code: 6WQ9+3C Eschenbach
Corona: at least 3G, possible 2G depending CH rules

Pleased to meet you at Dorftreff Eschenbach SG
MG-Bussard / https://mg-Bussard.ch/ / & IFM / https://www.indoorflyers.ch/ / & Swiss Indoor Team // https://modellflug.ch/indoor/

_________________
Vertigo 2m, Extra 330SC, Supertrino F3P (54g)+Lantsov 15", RCFactory Extra 330LT, JETI DS16


Nahoru
 Profil Soukromé album  
 
 Předmět příspěvku: Re: Halová sezóna 2021-2022
PříspěvekNapsal: sob 25.09.2021 12:56 
Moderátor serveru
Moderátor serveru
Uživatelský avatar

Registrován: 29.1.2004
Příspěvky: 5848
Bydliště: Týn nad Vltavou
Obrázky: 5
Blog: Zobrazit blog (1)
A sestavy budou tady.

RCEA (2021-2022)
Je to národní náborová kategorie určená pro nováčky v hale. Typicky se létá s modely Clik od RC Factory, které splňují pravidla: Hmotnost minimálně 100 gramů, a žádné protiběžné vrtule!
Celá pravidla najdete na stránkách svazu modelářů české republiky na straně 194. Nováčkům také doporučuji pročíst si příručku pro bodování akrobacie.

1.vzlet
2.přemet
3.souvrat
4.polovina kubánské osmičky
5.let na zádech do kruhu
6.výkrut
7.osmička ve vodorovném letu
8.nožový let
9.čtvercový přemet
10.přímý let na zádech
11. přistání


Následující sestavy mají aresti "obrázky" v přiloženém PDF.

Příloha:
Pilot information 23 schedules.pdf [441.77 KiB]
332 krát


F3P AA (zatím v angličtině)
ADVANCED SCHEDULE AA-23 (2022-2023)
AA-23.01 Pyramid with quarter roll, quarter roll
From upright, pull though a one eighth loop into a forty-five degree upline, perform a quarter roll, perform
a quarter knife loop into a forty-five degree knife-edge downline, perform a quarter roll, push through a
one eighth loop, exit inverted.
AA-23.02 Crossbox Top Hat with quarter roll, half roll, quarter roll
From inverted, push through a quarter loop into a vertical upline, perform a quarter roll, push through a
quarter loop into a crossbox upright horizontal line, perform a half roll, pull through a quarter loop into a
vertical downline, perform a quarter roll, pull through a quarter loop, exit upright.
AA-23.03 Loop with roll integrated
From upright, pull through a loop while integrating a roll, exit upright.
AA-23.04 Shark Fin with half roll, half roll
From upright, pull through a quarter loop into a vertical upline, perform a half roll, push through a three
eighths loop into a forty-five-degree downline, perform a half roll, push through a one eighth loop, exit
inverted.
AA-23.05 Torque Roll
From inverted, push through a quarter loop into a vertical upline, perform a torque roll, pull through a
quarter loop, exit inverted
AA-23.06 Half Hourglass
From inverted, pull though a one eighth loop into a forty-five degree downline, push through a three
eighths loop into a vertical upline, push through a three eighths loop into a forty-five degree downline, pull
through a 1/8 loop, exit upright.
AA-23.07 Rolling Circle
From upright, perform a rolling circle with one roll integrated, exit upright.
AA-23.08 Figure ET with half roll
From upright, pull through a one eighth loop into a forty-five-degree upline, perform a half roll, push
through a five eighths loop into a vertical downline, pull through a quarter loop, exit upright.
AA-23.09 Crossbox Figure Z with quarter roll, half roll quarter roll
From upright, perform a quarter roll into knife-edge flight, push through a three eighths knife-edge circle
into a forty-five-degree cross box line, perform a half roll, push through a three eighths knife-edge circle,
perform a quarter roll, exit upright.
AA-23.10 Stall Turn with quarter roll, quarter roll
From upright pull through a quarter loop into a vertical upline, perform a quarter roll, perform a stall turn
into a vertical downline, perform a quarter roll, pull through a quarter loop exit upright.
AA-23.11 Square Loop with quarter roll, quarter roll
From upright, in the center perform a quarter roll into knife-edge flight, perform a quarter knife-edge loop
into a vertical upline, perform a quarter knife-edge loop, perform a quarter roll, pull through a quarter loop
into a vertical downline, pull through a quarter loop, exit upright.
(Note: The manoeuvre is finished when the aircraft has crossed the center line.)


F3P AP (zatím v angličtině)
PRELIMINARY SCHEDULE AP-23 (2022-2023)
AP-23.01 Pyramid with quarter roll, half roll integrated, quarter roll
From upright, pull though a one eighth loop into a forty-five degree upline, perform a quarter roll, perform
a quarter knife-edge loop with integrated half roll into a forty-five-degree knife-edge downline, perform a
quarter roll, push through a one eighth loop, exit inverted.
AP-23.02 Crossbox Top Hat with half roll, half roll, half roll
From inverted, push through a quarter loop into a vertical upline, perform a half roll, perform a quarter
knife-edge loop into a crossbox knife-edge flight, perform a half roll, perform a quarter knife-edge loop
into a vertical downline, perform a half roll, pull through a quarter loop, exit upright.
AP-23.03 Loop with half roll integrated, half roll in opposite direction integrated
From upright, pull through a loop while integrating a half roll into the first 180 degrees of the loop and a
half roll in opposite direction to the first half roll into the second 180 degrees of the loop, exit upright.
AP-23.04 Shark Fin with quarter roll, half roll, quarter roll
From upright, perform a quarter roll into knife-edge flight, perform a quarter knife-edge loop into a vertical
upline, perform a half roll, perform a three eighths knife-edge loop into a forty-five degree downline,
perform a quarter roll, push through a one eighth loop, exit inverted.
AP-23.05 Three quarter Torque Roll, Upline, three Quarter Torque Roll in opposite direction
From inverted, push through a quarter loop into a vertical upline, perform a three quarter torque roll,
followed by a vertical upline, perform a three quarter torque roll in opposite direction to the first torque roll,
pull through a quarter loop, exit inverted
AP-23.06 Half Hourglass with two consecutive quarter rolls, roll, half roll
From inverted, pull though a one eighth loop into a forty-five-degree downline, perform consecutively two
quarter rolls, pull through a three eighths loop into a vertical upline, perform a roll, pull through a three
eighths loop into a forty-five-degree downline, perform a half roll, pull through a one eighth loop, exit
upright.
AP-23.07 Rolling Circle with two rolls in opposite directions
From upright, perform a rolling circle with two rolls in opposite directions integrated (first roll to the
outside), exit upright.
AP-23.08 Figure ET with quarter roll, quarter roll
From upright, pull through a one eighth loop into a forty-five degree upline, perform a quarter roll, perform
a five eighths knife-edge loop into a vertical downline, perform a quarter roll, pull through a quarter loop,
exit upright.
AP-23.09 Crossbox Figure Z with quarter roll, four consecutive one eighth rolls, quarter roll
From upright, perform a quarter roll into knife-edge flight, push through a three eighths knife-edge circle
into a forty-five degree cross box line, perform consecutively four one eighth rolls, push through a three
eighths knife-edge circle, perform a quarter roll, exit inverted.
AP-23.10 Stall Turn with three quarter roll, quarter roll
From inverted push through a quarter loop into a vertical upline, perform a three quarter roll, perform a
stall turn into a vertical downline, perform a quarter roll, pull through a quarter loop exit upright.
AP-23.11 Square Loop with quarter roll, quarter roll, quarter roll, quarter roll
From upright, in the center perform a quarter roll into knife-edge flight, perform a quarter knife-edge loop
into a vertical upline, perform a quarter roll, pull through a quarter loop, perform a quarter roll, perform a
quarter knife-edge loop into a vertical downline, perform a quarter roll, pull through a quarter loop, exit
upright.
(Note: The manoeuvre is finished when the aircraft has crossed the center line.)


F3P AF (zatím v angličtině)
FINAL SCHEDULE AF-23 (2022-2023)
AF-23.01 Square Loop with half roll, quarter roll, two consecutive quarter rolls, quarter roll
From upright, perform a half roll in the center, push through a quarter loop into a vertical upline, perform a
quarter roll, perform a quarter knife-edge loop into knife-edge flight, perform consecutively two
consecutive quarter rolls in the center, perform a quarter knife-edge loop into a vertical downline, perform
a quarter roll, pull through a quarter loop, exit upright.
AF-23.02 Double Stall Turn with half roll, half roll, half roll
From upright, pull through a quarter loop into a vertical upline, perform a half roll, perform a stall turn into
a vertical downline, perform a quarter knife-edge loop into a knife-edge crossbox line, perform a half roll,
perform a quarter knife-edge loop into a vertical upline, perform a half roll, perform a stall turn into a
vertical downline, push through a quarter loop, exit inverted.
AF-23.03 Double Humpty Bump with quarter roll, half roll integrated, quarter roll, quarter roll, half
roll integrated, quarter roll
From inverted, before the center push through a quarter loop into a vertical upline, perform a quarter roll,
perform a half knife-edge loop (towards the center) with integrated half roll into a vertical downline,
perform a quarter roll, push through a half loop in the center into a vertical upline, perform a quarter roll,
perform a half knife-edge loop (away from the center) with integrated half roll into a vertical downline,
perform a quarter roll, push through a quarter loop, exit inverted.
AF-23.04 Half Square Loop with four consecutive one quarter torque rolls
From inverted, push through a quarter loop into a vertical upline, perform consecutively four one quarter
torque rolls on same level, push through a quarter loop, exit upright.
AF-23.05 Loop Crossbox Circle Combination with half roll integrated, half roll integrated, half roll
integrated, half roll integrated
From upright, push through a half loop, while integrating a half roll, perform a crossbox circle with two half
rolls in opposite direction integrated, pull through a half loop, while integrating a half roll in opposite
direction of the half roll in the first half loop, exit upright.
AF-23.06 Half Loop with two consecutive quarter rolls in opposite direction integrated
From upright push through a half loop while integrating consecutively two quarter rolls in opposite
direction, exit inverted.
AF-23.07 Crossbox Top Hat with quarter roll, two consecutive one eight rolls, two consecutive one
eight rolls in opposite direction, quarter roll
From inverted, push through a quarter loop into a vertical upline, perform a quarter roll, push through a
quarter loop into a horizontal crossbox line, perform consecutively two one eighth rolls, followed by two
consecutive one eighth rolls in opposite direction, push through a quarter loop into a vertical downline,
perform a quarter roll, pull through a quarter loop, exit upright.
AF-23.08 Corner Combination with half roll integrated, quarter roll, half roll integrated
From upright, perform a quarter circle into a crossbox line, while integrating a half roll, push through a
quarter loop into a vertical upline, perform a quarter roll, pull through a quarter loop while integrating a
half roll, exit upright
AF-23.09 Triangle with quarter roll, half roll integrated, quarter roll
From upright, fly past center, push through a three eighths loop into a forty-five degree downline, perform
a quarter roll, perform a quarter knife-edge loop into a forty-five degree upline, while integrating a half roll,
perform a quarter roll, push through a three eighths loop, exit upright.
AF-23.10 Reverse Shark Fin from Top with quarter roll, half roll, quarter roll
From upright, push through a one eighth loop into a forty-five degree downline, perform a quarter roll,

perform a three eighths knife-edge loop into a vertical upline, perform a half roll, perform a quarter knife-
edge loop, perform a quarter roll, exit upright.

AF-23.11Triangle Crossbox Square Combination with quarter roll, three consecutive one eighth
rolls, half roll, three consecutive one eighth rolls, quarter roll
From upright, push through a one eighth loop into a forty-five degree downline, perform a quarter roll, pull
through a quarter knife-edge loop into a crossbox line with forty-five degree wing level, perform
consecutively three one eighth rolls into knife-edge flight, push through a quarter knife-edge circle,
perform a half roll, pull through a quarter knife-edge circle into a knife-edge crossbox line, perform

consecutively three one eighth rolls into forty five degree wing level flight, push through a quarter knife-
edge loop into a forty-five degree upline, perform a quarter roll, push through a one eighth loop, exit

upright.
Option:
From upright, push through a one eighth loop into a forty-five degree downline, perform a quarter roll,
push through a quarter knife-edge loop into a crossbox line with forty-five degree wing level, perform
consecutively three one eighth rolls into knife-edge flight, pull through a quarter knife-edge circle, perform
a half roll, push through a quarter knife-edge circle into a knife-edge crossbox line, perform consecutively
three one eighth rolls into forty five degree wing level flight, pull through a quarter knife-edge loop into a
forty-five degree upline, perform a quarter roll, push through a one eighth loop, exit upright.
Note: Exit starts in the center.

_________________
Vertigo 2m, Extra 330SC, Supertrino F3P (54g)+Lantsov 15", RCFactory Extra 330LT, JETI DS16


Nahoru
 Profil Soukromé album  
 
 Předmět příspěvku: Re: Halová sezóna 2021-2022
PříspěvekNapsal: čtv 10.02.2022 20:22 
Zkušený debatér
Zkušený debatér
Uživatelský avatar

Registrován: 5.2.2011
Příspěvky: 465
Bydliště: Mělník
Letová ukázka sestavy RCEA



Návod jak vložit video do příspěvku na RCMANIA.cz


Nahoru
 Profil  
 
 Předmět příspěvku: Re: Halová sezóna 2021-2022
PříspěvekNapsal: čtv 10.02.2022 23:09 
Administrátor serveru
Administrátor serveru
Uživatelský avatar

Registrován: 24.4.2003
Příspěvky: 10762
Bydliště: Praha Hloubětín ČR
Obrázky: 266
Blog: Zobrazit blog (3)
Perfektní ukázka v maličké tělocvičně.
Díky


Nahoru
 Profil Soukromé album {RCalbum.cz}  
 
Zobrazit příspěvky za předchozí:  Seřadit podle  
Odeslat nové téma Odpovědět na téma  [ Příspěvků: 5 ] 

 


Kdo je online

Uživatelé procházející toto fórum: Žádní registrovaní uživatelé a 19 návštevníků


Nemůžete zakládat nová témata v tomto fóru
Nemůžete odpovídat v tomto fóru
Nemůžete upravovat své příspěvky v tomto fóru
Nemůžete mazat své příspěvky v tomto fóru
Nemůžete přikládat soubory v tomto fóru

Hledat:
Přejít na:  

 

  Powered by phpBB® Forum Software © phpBB Group  Český překlad – phpBB.cz 

 

NAVRCHOLU.cz