Halová sezóna 2022/2023

Všechno co se týká lehkých modelů, slow a parkflyerů.
Odpovědět
Zpráva
Autor
Uživatelský avatar
HonzaS
Příspěvky: 5866
Registrován: čtv 29.01.2004 0:00
Bydliště: Týn nad Vltavou

Halová sezóna 2022/2023

#1 Příspěvek od HonzaS »

Ahoj,
protože už se nám plní kalendář zimních soutěží halových akrobatů (a pyloňáků), zakládám tradiční vlákno s kalendářem, výsledky atp.
Obrázek
Vertigo 2m, Extra 330SC, Supertrino F3P (54g)+Lantsov 15", RCFactory Extra 330LT, JETI DS16
Uživatelský avatar
HonzaS
Příspěvky: 5866
Registrován: čtv 29.01.2004 0:00
Bydliště: Týn nad Vltavou

Re: Halová sezóna 2022/2023

#2 Příspěvek od HonzaS »

Kalendář soutěží bude průběžně doplňován:

F3P World Cup, Jonava, Litva 29-30.10.2022
Info: https://www.f3plithuania.eu/2022-jonava ... -info.html

19. Mistrovství Německa 19-20.11. v Neckartailfingen
sestavy a pravidla na stranách 5 a dále (Rookie = něco jako RCEA, F3P AA, F3P)
https://www.dmfv.aero/wp-content/upload ... K-2022.pdf
Informace a přihlášky (do 30.října):
https://www.dmfv.aero/sportreferate/slo ... flug-2022/
dmfv.JPG


Air Race Kaplice 14.1.2023
Dle místních pravidel, včetně závodu za tmy a kategorie maket
Více info: https://www.airracekaplice.cz/
cde671b3-49bc-4e3d-87c4-774c6c1a234b.jpg


3. Kralupská halovka 28.1.2023
Přihlašovací formulář: https://forms.office.com/e/QVX6uBqHNn
Další info: Hala bude otevřená od 7:00, přezuvky nutné.
Kontakt: Radek Doubrava, drade@seznam.cz tel: 604945482
Adresa na halu V Luhu 1089, 278 01 Kralupy nad Vltavou. Odkaz: https://goo.gl/maps/s9bJ5RyAJ71nWjX48v
3_Kralupska_halovka_2023.jpg


Varnsdorfská halovka 11.2.2023
Přihlášky : pilot.jindra@email.cz
Místo konání : Městská sportovní hala VARNSDORF-Ul.Západní 2984
POZOR!!! Přezůvky nutné
Startovné - bude upřesněno
Za LMK Varnsdorf - Jindřich štrubínský tel.775 480 405
Létáme kat. - RCEA,F3P-AA,F3P-AP, F3P-AM, PYLONY a AIR-RACE.
Hala bude otevřena od 7 00 hod.

Slovak indoor, Viničné, 18.2.2023
Plagat SLOVAK INDOOR 2023.png


Mistrovství světa v halové akrobacii, Litva, 19-25.3.
WCLitva.JPG
Vertigo 2m, Extra 330SC, Supertrino F3P (54g)+Lantsov 15", RCFactory Extra 330LT, JETI DS16
Uživatelský avatar
HonzaS
Příspěvky: 5866
Registrován: čtv 29.01.2004 0:00
Bydliště: Týn nad Vltavou

Re: Halová sezóna 2022/2023

#3 Příspěvek od HonzaS »

Národní kategorie RCEA:

1. Vzlet K = 1
2. Normální přemet K = 2
3. Souvrat K = 2
4. Polovina kubánské osmičky K = 3
5. Let na zádech do kruhu K = 3
6. Výkrut K = 2
7. Osmička ve vodorovném letu K = 3
8. Nožový let K = 4
9. Čtvercový přemet K = 3
10. Přímý let na zádech K = 2
11. Přistání K = 1
12. Celkový dojem letu K = 1

Více ve sportovním řádu na straně 193 :-)

Instruktážní video:
[youtube]https://www.youtube.com/watch?v=M4GWTTTaT48[/youtube]

Mezinárodní sestavy v PDF:
Pilot information 23 schedules (1).pdf
(441.77 KiB) Staženo 174 x


F3P AA (zatím v angličtině)
ADVANCED SCHEDULE AA-23 (2022-2023)

Na straně 95 sportovního řádu :-)

AA-23.01 Pyramid with quarter roll, quarter roll
From upright, pull though a one eighth loop into a forty-five degree upline, perform a quarter roll, perform
a quarter knife loop into a forty-five degree knife-edge downline, perform a quarter roll, push through a
one eighth loop, exit inverted.
AA-23.02 Crossbox Top Hat with quarter roll, half roll, quarter roll
From inverted, push through a quarter loop into a vertical upline, perform a quarter roll, push through a
quarter loop into a crossbox upright horizontal line, perform a half roll, pull through a quarter loop into a
vertical downline, perform a quarter roll, pull through a quarter loop, exit upright.
AA-23.03 Loop with roll integrated
From upright, pull through a loop while integrating a roll, exit upright.
AA-23.04 Shark Fin with half roll, half roll
From upright, pull through a quarter loop into a vertical upline, perform a half roll, push through a three
eighths loop into a forty-five-degree downline, perform a half roll, push through a one eighth loop, exit
inverted.
AA-23.05 Torque Roll
From inverted, push through a quarter loop into a vertical upline, perform a torque roll, pull through a
quarter loop, exit inverted
AA-23.06 Half Hourglass
From inverted, pull though a one eighth loop into a forty-five degree downline, push through a three
eighths loop into a vertical upline, push through a three eighths loop into a forty-five degree downline, pull
through a 1/8 loop, exit upright.
AA-23.07 Rolling Circle
From upright, perform a rolling circle with one roll integrated, exit upright.
AA-23.08 Figure ET with half roll
From upright, pull through a one eighth loop into a forty-five-degree upline, perform a half roll, push
through a five eighths loop into a vertical downline, pull through a quarter loop, exit upright.
AA-23.09 Crossbox Figure Z with quarter roll, half roll quarter roll
From upright, perform a quarter roll into knife-edge flight, push through a three eighths knife-edge circle
into a forty-five-degree cross box line, perform a half roll, push through a three eighths knife-edge circle,
perform a quarter roll, exit upright.
AA-23.10 Stall Turn with quarter roll, quarter roll
From upright pull through a quarter loop into a vertical upline, perform a quarter roll, perform a stall turn
into a vertical downline, perform a quarter roll, pull through a quarter loop exit upright.
AA-23.11 Square Loop with quarter roll, quarter roll
From upright, in the center perform a quarter roll into knife-edge flight, perform a quarter knife-edge loop
into a vertical upline, perform a quarter knife-edge loop, perform a quarter roll, pull through a quarter loop
into a vertical downline, pull through a quarter loop, exit upright.
(Note: The manoeuvre is finished when the aircraft has crossed the center line.)


F3P AP (zatím v angličtině)
PRELIMINARY SCHEDULE AP-23 (2022-2023)

Na straně 95 sportovního řádu :-)

AP-23.01 Pyramid with quarter roll, half roll integrated, quarter roll
From upright, pull though a one eighth loop into a forty-five degree upline, perform a quarter roll, perform
a quarter knife-edge loop with integrated half roll into a forty-five-degree knife-edge downline, perform a
quarter roll, push through a one eighth loop, exit inverted.
AP-23.02 Crossbox Top Hat with half roll, half roll, half roll
From inverted, push through a quarter loop into a vertical upline, perform a half roll, perform a quarter
knife-edge loop into a crossbox knife-edge flight, perform a half roll, perform a quarter knife-edge loop
into a vertical downline, perform a half roll, pull through a quarter loop, exit upright.
AP-23.03 Loop with half roll integrated, half roll in opposite direction integrated
From upright, pull through a loop while integrating a half roll into the first 180 degrees of the loop and a
half roll in opposite direction to the first half roll into the second 180 degrees of the loop, exit upright.
AP-23.04 Shark Fin with quarter roll, half roll, quarter roll
From upright, perform a quarter roll into knife-edge flight, perform a quarter knife-edge loop into a vertical
upline, perform a half roll, perform a three eighths knife-edge loop into a forty-five degree downline,
perform a quarter roll, push through a one eighth loop, exit inverted.
AP-23.05 Three quarter Torque Roll, Upline, three Quarter Torque Roll in opposite direction
From inverted, push through a quarter loop into a vertical upline, perform a three quarter torque roll,
followed by a vertical upline, perform a three quarter torque roll in opposite direction to the first torque roll,
pull through a quarter loop, exit inverted
AP-23.06 Half Hourglass with two consecutive quarter rolls, roll, half roll
From inverted, pull though a one eighth loop into a forty-five-degree downline, perform consecutively two
quarter rolls, pull through a three eighths loop into a vertical upline, perform a roll, pull through a three
eighths loop into a forty-five-degree downline, perform a half roll, pull through a one eighth loop, exit
upright.
AP-23.07 Rolling Circle with two rolls in opposite directions
From upright, perform a rolling circle with two rolls in opposite directions integrated (first roll to the
outside), exit upright.
AP-23.08 Figure ET with quarter roll, quarter roll
From upright, pull through a one eighth loop into a forty-five degree upline, perform a quarter roll, perform
a five eighths knife-edge loop into a vertical downline, perform a quarter roll, pull through a quarter loop,
exit upright.
AP-23.09 Crossbox Figure Z with quarter roll, four consecutive one eighth rolls, quarter roll
From upright, perform a quarter roll into knife-edge flight, push through a three eighths knife-edge circle
into a forty-five degree cross box line, perform consecutively four one eighth rolls, push through a three
eighths knife-edge circle, perform a quarter roll, exit inverted.
AP-23.10 Stall Turn with three quarter roll, quarter roll
From inverted push through a quarter loop into a vertical upline, perform a three quarter roll, perform a
stall turn into a vertical downline, perform a quarter roll, pull through a quarter loop exit upright.
AP-23.11 Square Loop with quarter roll, quarter roll, quarter roll, quarter roll
From upright, in the center perform a quarter roll into knife-edge flight, perform a quarter knife-edge loop
into a vertical upline, perform a quarter roll, pull through a quarter loop, perform a quarter roll, perform a
quarter knife-edge loop into a vertical downline, perform a quarter roll, pull through a quarter loop, exit
upright.
(Note: The manoeuvre is finished when the aircraft has crossed the center line.)


F3P AF (zatím v angličtině)
FINAL SCHEDULE AF-23 (2022-2023)

Na straně 95 sportovního řádu :-)

AF-23.01 Square Loop with half roll, quarter roll, two consecutive quarter rolls, quarter roll
From upright, perform a half roll in the center, push through a quarter loop into a vertical upline, perform a
quarter roll, perform a quarter knife-edge loop into knife-edge flight, perform consecutively two
consecutive quarter rolls in the center, perform a quarter knife-edge loop into a vertical downline, perform
a quarter roll, pull through a quarter loop, exit upright.
AF-23.02 Double Stall Turn with half roll, half roll, half roll
From upright, pull through a quarter loop into a vertical upline, perform a half roll, perform a stall turn into
a vertical downline, perform a quarter knife-edge loop into a knife-edge crossbox line, perform a half roll,
perform a quarter knife-edge loop into a vertical upline, perform a half roll, perform a stall turn into a
vertical downline, push through a quarter loop, exit inverted.
AF-23.03 Double Humpty Bump with quarter roll, half roll integrated, quarter roll, quarter roll, half
roll integrated, quarter roll
From inverted, before the center push through a quarter loop into a vertical upline, perform a quarter roll,
perform a half knife-edge loop (towards the center) with integrated half roll into a vertical downline,
perform a quarter roll, push through a half loop in the center into a vertical upline, perform a quarter roll,
perform a half knife-edge loop (away from the center) with integrated half roll into a vertical downline,
perform a quarter roll, push through a quarter loop, exit inverted.
AF-23.04 Half Square Loop with four consecutive one quarter torque rolls
From inverted, push through a quarter loop into a vertical upline, perform consecutively four one quarter
torque rolls on same level, push through a quarter loop, exit upright.
AF-23.05 Loop Crossbox Circle Combination with half roll integrated, half roll integrated, half roll
integrated, half roll integrated
From upright, push through a half loop, while integrating a half roll, perform a crossbox circle with two half
rolls in opposite direction integrated, pull through a half loop, while integrating a half roll in opposite
direction of the half roll in the first half loop, exit upright.
AF-23.06 Half Loop with two consecutive quarter rolls in opposite direction integrated
From upright push through a half loop while integrating consecutively two quarter rolls in opposite
direction, exit inverted.
AF-23.07 Crossbox Top Hat with quarter roll, two consecutive one eight rolls, two consecutive one
eight rolls in opposite direction, quarter roll
From inverted, push through a quarter loop into a vertical upline, perform a quarter roll, push through a
quarter loop into a horizontal crossbox line, perform consecutively two one eighth rolls, followed by two
consecutive one eighth rolls in opposite direction, push through a quarter loop into a vertical downline,
perform a quarter roll, pull through a quarter loop, exit upright.
AF-23.08 Corner Combination with half roll integrated, quarter roll, half roll integrated
From upright, perform a quarter circle into a crossbox line, while integrating a half roll, push through a
quarter loop into a vertical upline, perform a quarter roll, pull through a quarter loop while integrating a
half roll, exit upright
AF-23.09 Triangle with quarter roll, half roll integrated, quarter roll
From upright, fly past center, push through a three eighths loop into a forty-five degree downline, perform
a quarter roll, perform a quarter knife-edge loop into a forty-five degree upline, while integrating a half roll,
perform a quarter roll, push through a three eighths loop, exit upright.
AF-23.10 Reverse Shark Fin from Top with quarter roll, half roll, quarter roll
From upright, push through a one eighth loop into a forty-five degree downline, perform a quarter roll,

perform a three eighths knife-edge loop into a vertical upline, perform a half roll, perform a quarter knife-
edge loop, perform a quarter roll, exit upright.

AF-23.11Triangle Crossbox Square Combination with quarter roll, three consecutive one eighth
rolls, half roll, three consecutive one eighth rolls, quarter roll
From upright, push through a one eighth loop into a forty-five degree downline, perform a quarter roll, pull
through a quarter knife-edge loop into a crossbox line with forty-five degree wing level, perform
consecutively three one eighth rolls into knife-edge flight, push through a quarter knife-edge circle,
perform a half roll, pull through a quarter knife-edge circle into a knife-edge crossbox line, perform

consecutively three one eighth rolls into forty five degree wing level flight, push through a quarter knife-
edge loop into a forty-five degree upline, perform a quarter roll, push through a one eighth loop, exit

upright.
Option:
From upright, push through a one eighth loop into a forty-five degree downline, perform a quarter roll,
push through a quarter knife-edge loop into a crossbox line with forty-five degree wing level, perform
consecutively three one eighth rolls into knife-edge flight, pull through a quarter knife-edge circle, perform
a half roll, push through a quarter knife-edge circle into a knife-edge crossbox line, perform consecutively
three one eighth rolls into forty five degree wing level flight, pull through a quarter knife-edge loop into a
forty-five degree upline, perform a quarter roll, push through a one eighth loop, exit upright.
Note: Exit starts in the center.
Vertigo 2m, Extra 330SC, Supertrino F3P (54g)+Lantsov 15", RCFactory Extra 330LT, JETI DS16
Uživatelský avatar
HonzaS
Příspěvky: 5866
Registrován: čtv 29.01.2004 0:00
Bydliště: Týn nad Vltavou

Re: Halová sezóna 2022/2023

#4 Příspěvek od HonzaS »

rezerva kdyby náhodou :-)
Vertigo 2m, Extra 330SC, Supertrino F3P (54g)+Lantsov 15", RCFactory Extra 330LT, JETI DS16
Uživatelský avatar
clouseau
Příspěvky: 811
Registrován: pon 01.03.2004 0:00
Bydliště: Turnov
Kontaktovat uživatele:

Re: Halová sezóna 2022/2023

#5 Příspěvek od clouseau »

...a sestavy stále nic?
Vladislav Plichta
www.clouseau.eu
místopředseda
KLeM ČR
Uživatelský avatar
HonzaS
Příspěvky: 5866
Registrován: čtv 29.01.2004 0:00
Bydliště: Týn nad Vltavou

Re: Halová sezóna 2022/2023

#6 Příspěvek od HonzaS »

clouseau píše:...a sestavy stále nic?


Omlouvám se za zdržení, už jsou tu.

H.
Vertigo 2m, Extra 330SC, Supertrino F3P (54g)+Lantsov 15", RCFactory Extra 330LT, JETI DS16
RCmainak.sk
Příspěvky: 3
Registrován: úte 08.11.2022 7:20

Re: Halová sezóna 2022/2023

#7 Příspěvek od RCmainak.sk »

Nehovoril som Tomáši že to bude magické tlačidlo CTRL C - CTRL V :lol:
Na toto čakali halovkári skoro pol roka :?
Honzo aspoň si to mohol dať do prekladača :(
Uživatelský avatar
HonzaS
Příspěvky: 5866
Registrován: čtv 29.01.2004 0:00
Bydliště: Týn nad Vltavou

Re: Halová sezóna 2022/2023

#8 Příspěvek od HonzaS »

RCmainak.sk píše:Nehovoril som Tomáši že to bude magické tlačidlo CTRL C - CTRL V :lol:
Na toto čakali halovkári skoro pol roka :?
Honzo aspoň si to mohol dať do prekladača :(


Pokud je to ctrl c ctrl v narážka na to, že se sestavy nezměnily, tak gratuluju, uhodl jsi!

Mezinárodní sestavy mají v názvu rok 2023, mění se každé dva roky a jsou k nahlédnutí v sekci F3. Takže uhodnout tohle chtělo fakt fištrón!

Měnit sestavu RCEA po jedné loňské soutěži taky dává totálně smysl :lol: A nemusel jsi půl roku čekat až jí tu zveřejním, je celou dobu ve sportovním řádu. Změny vždy hlásíme v dostatečném předstihu.

H.
Vertigo 2m, Extra 330SC, Supertrino F3P (54g)+Lantsov 15", RCFactory Extra 330LT, JETI DS16
RCmainak.sk
Příspěvky: 3
Registrován: úte 08.11.2022 7:20

Re: Halová sezóna 2022/2023

#9 Příspěvek od RCmainak.sk »

Ďakujem za odpoveď Honzo.

Tebe sa to zdá možno samozrejmé ale veľa ľudí čakalo na túto informáciu.

Neprišlo ti divné že sa na zostavy pýta aj pán Plichta, ktorý je v predsedníctve KLeMČR a medzinárodný bodovač F3P? Čo si o tom majú myslieť ostatní halovlári?

Ja som sa do tejto diskusie nepridal preto aby som čokoľvek hádal ako píšeš, ale preto že si nereagoval ani na jeho príspevok.

No WOW , máš tam ešte jednu rezervu keby náhodou :-)

Teším sa na tvoj preklad F3P zostáv do češtiny. Aj v sezóne 2021-2022 si to nechal v angličtine: F3P AA (zatím v angličtině) , tak ti držím palce aby sa ti to tento rok podarilo.

http://www.rcmania.cz/viewtopic.php?f=6&t=90540&p=1528529&hilit=Halov%C3%A1+zo%C3%B3na+2022#p1528529

Ak s tým máš problém tak napíš a ja to preložím za teba :D

Ešte mi vŕta hlavou ako vieš čo sa v minuloročnej sezóne lietalo keď si nebol ani na jednej súťaži, a to boli dve a nie jedna ako píšeš :idea:
Berry_SK
Příspěvky: 4
Registrován: pon 10.04.2017 12:13

Re: Halová sezóna 2022/2023

#10 Příspěvek od Berry_SK »

Plagat SLOVAK INDOOR 2023.png


Srdečne Vás pozývame na Slovak Indoor 2023 vo Viničnom.

Termín: 18.02.2023
Miesto: Spoločenský dom Viničné, Cintorínska 11, 900 23 Viničné
GPS: 48° 16' 11.2193777" N, 17° 17' 48.3019638" E
Kategórie: RCEA, F3P-AP, F3P-AA, F3P-AM, AIR-RACE

Prihlášky: mailom na adresu abgalovic@gmail.com
Štartovné: 15€ (platí sa pri prezentácií)
Uzávierka prihlášok: 06.02.2023

Program:
7:30 - 8:30 prezentácia, voľné lietanie
8:30 zahájenie úvodný brífing
od 8:45- súťažné lety
I.kolo RCEA, F3P-AA, F3P-AP, F3P-AM
II.kolo RCEA ,F3P-AA, F3P-AP, F3P-AM
III.kolo RCEA, F3P-AA, F3P-AP, F3P-AM
AIR-RACE
vyhlásenie výsledkov


Tešíme sa na Vás
organizačný tím
Naposledy upravil(a) Berry_SK dne stř 01.02.2023 9:33, celkem upraveno 1 x.
Uživatelský avatar
HonzaS
Příspěvky: 5866
Registrován: čtv 29.01.2004 0:00
Bydliště: Týn nad Vltavou

Re: Halová sezóna 2022/2023

#11 Příspěvek od HonzaS »

Berry_SK píše:
Plagat SLOVAK INDOOR 2023.png


Díky, přidáno do kalendáře výše.

H
Vertigo 2m, Extra 330SC, Supertrino F3P (54g)+Lantsov 15", RCFactory Extra 330LT, JETI DS16
Uživatelský avatar
HonzaS
Příspěvky: 5866
Registrován: čtv 29.01.2004 0:00
Bydliště: Týn nad Vltavou

Re: Halová sezóna 2022/2023

#12 Příspěvek od HonzaS »

Výsledkový servis z Kralup. Bylo to super, moc díky pořadatelům i spolupořadatelům!
Přílohy
vysledkovka3.pdf
(187.8 KiB) Staženo 167 x
Vertigo 2m, Extra 330SC, Supertrino F3P (54g)+Lantsov 15", RCFactory Extra 330LT, JETI DS16
Uživatelský avatar
HonzaS
Příspěvky: 5866
Registrován: čtv 29.01.2004 0:00
Bydliště: Týn nad Vltavou

Re: Halová sezóna 2022/2023

#13 Příspěvek od HonzaS »

Díky za parádní sobotní soutěž pořadatelům z Varnsdorfu! Pořadatelé se s tím zajištěním občerstvení nepářou, v Kaplici byla pípa, ve Varnsdorfu rum, vy nám pilotům dáváte!!!
Přílohy
PXL_20230215_165323144.jpg
PXL_20230211_112756378.jpg
Vertigo 2m, Extra 330SC, Supertrino F3P (54g)+Lantsov 15", RCFactory Extra 330LT, JETI DS16
Odpovědět

Zpět na „Pomalu a v hale“